The composition is based on alkyd resin and phenolic paint materials, rust-resistant pigments such as ferric oxide, aluminum powder, and body frequency materials.
The composition of dry agent, auxiliary agent and solvent.
The main characteristics of the paint film tough, with good adhesion; Dry faster; Good anti-rust performance; Good construction performance; No toxic gases will be produced during welding, cutting or pyrotechnical correction
The application is suitable for the use of rust proof primers for ships above the waterline, general compartments and general land steel structures.
The appearance is silver-red, the paint film is flat and slightly brushed.
Construction parameter volume solid part 48 % soil(measured according to GB / T9272 eqv IS 03233:1998)
Dry film thickness 40 μm
Wet film thickness 83 μm
Theoretical dosage 106 g/m2
Flash point 35 °C
Dry time(25 °C) surface dry ≤ 3h; Dry ≤ 24h
Duplication interval
Temperature 5 °C 20 °C 30 °C
Minimum 36h24h20h
Up to 3 months
It is recommended to cover 2 channels and the thickness of the dry film is greater than 80 μm
Various kinds of alkyd or phenolic finish applied to the front of the paint
Surface treatment of coated steel: sandblasting treatment to Sa 2; Oxidized leather steel: wind or electric grinding tools polished to St 3; Steel coated with workshop primer: secondary rust removal at film damage and rust, grinding to St3; Welding, Flame Cutting or Fireworks Calibration Combustion: Sanding to St 3
The temperature of the substrate under construction conditions must be higher than 3 °C above the dew point; Relative humidity not more than 85 %
Painting Method
No gas spraying diluent 104 diluent; 5 % dilution(in paint weight); The nozzle diameter is 0.4-0 .5 mm; Spray pressure 12-15 MPa(approximately 120-150 kg/cm2)
Air spray thinner 104 thinner; Dilution 0-10 %(by paint weight); The nozzle diameter is 2.0-3 .0 mm air pressure 0.3-0 .0. 4 MPa(about 3-4 kg/cm2)
Roll/brush thinner 104 thinner; Dilution 0-3 %(by paint weight)
Cleanser 104 diluent
Safety measures refer to the product safety technical specifications of Zhongsheng Paint(Ningbo) Co., Ltd..
Packaging 19kg
Warranty period 12 months
Remark for the correct use of our products, please carefully read this manual "use guidelines."
Declare that the above information and data are based on our experience in testing and practical use and can be used as a construction guide. We are only responsible for the quality of the paint itself for the construction that we do not understand. We shall have the right to modify this instruction according to the continuous improvement of the product.
